Araldite Standard Epoxy Adhesive
The Heavyweight Adhesive
The high bond strength adhesive for a wide variety of substrates.
Araldite® Standard is a two component epoxy adhesive used to bond a variety of substrates. It is suitable for bonding a wide variety of metals, stone, wood, glass, ceramic, rubber, dry concrete, asbestos, cement & bison board, fabric, leather & most rigid plastics.
Key features
- High bond strength of 120 kg / sq.cm and load bearing capacity of 470+ Kg
- Highest coverage of 120 sq.ft. / 1.8 kg set
- Easy to mix
- Heat & Chemical Resistant
Other features
- Compatible with Multiple Substrates
- Waterproof
- Highly Durable
- Pot life - 45 to 50 Mins
- Setting time - 6 to 7 Hrs
- Mixing Ratio by volume 1:1
- Color: Pale Yellow
Araldite standard SKU
- 5 g
- 9 g
- 13 g
- 34 g
- 36 g
- 90 g
- 180 g
- 270 g
- 450 g
- 700 g
- 1.08 kg
- 1.8 kg IN
- 1.8 kg U
- 3.6 kg
- 5.4 kg
- 9 kg IN
- 9 kg U
Application areas
How to apply
Roughen, degrease & dry surfaces to be bonded
Mix equal Volume of Resin & Hardener; Use the mix within 45 minutes
Apply thin layer on both surfaces and clamp joint overnight
Related products
Tenax Cera Fluida is a
Tenax Brio Top is an
Tenax Eliox A + B
For gluing and filling cracks
For protecting the porous and
Roff Cera Clean is a